WHO=1 - Lighting

Standard Message

In the table above, we learned a Standard Message consists of *WHO*WHAT*WHERE## .

• WHO identifies the service, such as scenario, light or automation
• WHAT is the action to be performed, such as light ON/OFF or dimmer, shutter up/down etc.
• WHERE identifies the object, which can be an area, group, an environment, or just a single light or shutter etc. A WHERE field can also come with optional parameters, separated by a hash (#), e.g. *WHERE#PAR1#PAR2#...#PARn

The WHAT Table

 Value  Description
------------------------------------ 
     0  Turn off
   0#x  Turn off at x speed for step
     1  Turn on
   1#x  Turn on at x speed for step
     2  20%
     3  30%
     4  40%
     5  50%
     6  60%
     7  70%
     8  80%
     9  90%
    10  100%
    11  ON timed 1 Min
    12  ON timed 2 Min
    13  ON timed 3 Min
    14  ON timed 4 Min
    15  ON timed 5 Min
    16  ON timed 15 Min
    17  ON timed 30 Min
    18  ON timed 0.5 Min
    20  Blinking on 0.5 sec
    21  Blinking on 1 sec
    22  Blinking on 1.5 sec
    23  Blinking on 2 sec
    24  Blinking on 2.5 sec
    25  Blinking on 3 sec
    26  Blinking on 3.5 sec
    27  Blinking on 4 sec
    28  Blinking on 4.5 sec
    29  Blinking on 5 sec
    30  Up one level
30#x#y  Up of x levels at y speed for steep
    31  Down one level
31#x#y  Down of x levels at y speed for step1000 
        It accepts a parameter that is the value of what table