Difference between revisions of "WHO=13 - Device Communication"
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
! style="text-align:left;"| Description | ! style="text-align:left;"| Description | ||
! style="text-align:left;"| ReadOnly/ReadWrite | ! style="text-align:left;"| ReadOnly/ReadWrite | ||
| + | ! style="text-align:left;"| Example | ||
| + | ! style="text-align:left;"| Explanation | ||
|- | |- | ||
|0 | |0 | ||
|Time | |Time | ||
|R/W | |R/W | ||
| + | |Get Time: *#13**0##<br>Set Time:*#13**#0*HH*MM*SS*TTT## | ||
|- | |- | ||
|1 | |1 | ||
| Line 58: | Line 61: | ||
|R | |R | ||
|} | |} | ||
| − | |||
== Known Devices == | == Known Devices == | ||
Revision as of 23:08, 21 November 2014
WHO 13 let's you communicate with your gateway or scenario manager.
We start with an Example
To find out what type of gateway and/or scenario manager you have, just send the message *#13**15## to your device, for example:
echo "*#13**15##" | netcat 192.168.60.201 20000
This gives you a similar answer like this:
*#*1##*#13**15*12##*#*1##
My device is shown as 12, looking up in the Device Table below, the device must be a F453AV
ATTRIBUTE Table
| ATTRIBUTE | Description | ReadOnly/ReadWrite | Example | Explanation |
|---|---|---|---|---|
| 0 | Time | R/W | Get Time: *#13**0## Set Time:*#13**#0*HH*MM*SS*TTT## | |
| 1 | Date | R/W | ||
| 10 | IP address | R | ||
| 11 | Net mask | R | ||
| 12 | MAC address | R | ||
| 15 | Device Type | R | ||
| 16 | Firmware version | R | ||
| 19 | Uptime | R | ||
| 22 | Date and Time | R/W | ||
| 23 | Kernel Version | R | ||
| 24 | Distribution Version | R |
Known Devices
| OWN-ID | Device |
|---|---|
| 2 | MHServer |
| 4 | MH200 |
| 6 | F452 |
| 7 | F452V |
| 11 | MHServer2 |
| 12 | F453AV |
| 13 | H4684 |
| 16 | F453 |
| 27 | L4686SDK |
| 44 | MH200N |
| 51 | F454 |
