Difference between revisions of "WHO=4 - Heating"
Jump to navigation
Jump to search
| Line 23: | Line 23: | ||
'''<pre> | '''<pre> | ||
| − | In these examples, | + | In these examples, the zone is always zone 5 |
*#4*5*0*0161## current temperature: 16.1 °C | *#4*5*0*0161## current temperature: 16.1 °C | ||
*#4*5*12*0070*3## real set point (set point + offset): 7.0 °C | *#4*5*12*0070*3## real set point (set point + offset): 7.0 °C | ||
*4*102*5## is in anti-freeze mode | *4*102*5## is in anti-freeze mode | ||
*#4*5*14*0215*3## set point: 21.5 °C | *#4*5*14*0215*3## set point: 21.5 °C | ||
| + | |||
| + | Offset | ||
*#4*5*13*00## manual offset: 0 | *#4*5*13*00## manual offset: 0 | ||
| + | *#4*5*13*01## manual offset: +1°C | ||
| + | *#4*5*13*02## manual offset: +2°C | ||
| + | *#4*5*13*03## manual offset: +3°C | ||
| + | *#4*5*13*11## manual offset: -1°C | ||
| + | *#4*5*13*12## manual offset: -2°C | ||
| + | *#4*5*13*13## manual offset: -3°C | ||
| + | |||
*4*102*#5## is in anti-freeze mode | *4*102*#5## is in anti-freeze mode | ||
Revision as of 17:43, 8 November 2015
Heating is a very nice service - especially in winter.
Contents
Some Commands Examples
*4*102*2## set zone 2 in anti-freeze mode *4*110*3## set zone 3 in manual mode *4*303*5## set zone 5 OFF
Some Request Examples
*#4*2*0## get current temp of zone 2
returns *#4*2*0*0225## = temperature in zone 2 is 22.5°C
Some Monitor Message Examples
In these examples, the zone is always zone 5 *#4*5*0*0161## current temperature: 16.1 °C *#4*5*12*0070*3## real set point (set point + offset): 7.0 °C *4*102*5## is in anti-freeze mode *#4*5*14*0215*3## set point: 21.5 °C Offset *#4*5*13*00## manual offset: 0 *#4*5*13*01## manual offset: +1°C *#4*5*13*02## manual offset: +2°C *#4*5*13*03## manual offset: +3°C *#4*5*13*11## manual offset: -1°C *#4*5*13*12## manual offset: -2°C *#4*5*13*13## manual offset: -3°C *4*102*#5## is in anti-freeze mode
WHAT Table
| WHAT | Description |
|---|---|
| 0 | Conditioning Mode |
| 1 | Heating Mode |
| 102 | Anti Freeze |
| 202 | Thermal Protection |
| 302 | Protection (generic) |
| 103 | OFF – Heating Mode |
| 203 | OFF – Conditioning Mode |
| 303 | OFF (Generic) |
| 110 | Manual-adjustment Mode – Heating |
| 210 | Manual-adjustment Mode – Conditioning |
| 310 | Manual-adjustment Mode (Generic) |
| 111 | Programming Mode – Heating |
| 211 | Programming Mode - Conditioning |
| 311 | Programming Mode (generic) |
| 115 | Holiday daily plan – Heating Mode |
| 215 | Holiday daily plan – Conditioning Mode |
| 315 | Holiday daily plan |
| 13xxx | Vacation scenario for xxx days – Heating mode (Xxx=0…999) |
| 23xxx | Vacation scenario for xxx days – Conditioning mode (xxx=0….999) |
| 33xxx | Vacation scenario for xxx days (xxx=0….999) |
| 3000 | Vacation scenario disabled |
| 11xx | Heating program x (x=1…3) |
| 21xx | Conditioning program x (x=1…3) |
| 31xx | Last activated program |
| 3100 | Scenario xx (xx=1…16) |
| 12xx | Scenario xx (xx=1...16) |
| 22xx | Last activated scenario |
| 32xx | Holiday scenario for xxx days – Heating mode (Xxx=0…999) |
| 3200 | Holiday scenario for xxx days – Conditioning mode (xxx=0….999) |
| 20 | Remote control disabled |
| 21 | Remote control enabled |
| 22 | At least one probe OFF |
| 23 | At least one probe in Anti Freeze |
| 24 | At least one probe in Manual |
| 30 | Failure discovered |
| 31 | Central Unit battery KO |
| 40 | Release of sensor local adjustment |
DIMENSION Table
| DIMENSION | Description | ReadOnly/ReadWrite |
|---|---|---|
| 0 | Measures Temperature | R |
| 11 | Fan coil Speed | R |
| 12 | Complete probe status | R |
| 13 | Local set offset | R |
| 14 | Set Point temperature | R/W |
| 19 | Valves status | R |
| 20 | Actuator Status | R |
| 22 | Split Control | R/W |
| 30 | End date Holiday Scenario | R/W |
| WHO=3 - Load Control | WHO Table | WHO=5 - Burglar Alarm |
