WHO=3 - Power Management

Automation is quite simple since there are only 3 commands available: UP, DOWN and STOP. Unfortunatelly a status request is not possible, so you never know if your shutters are opened or closed.

Standard Command *WHO*WHAT*WHERE##

Examples:

*2*1*15##        Shutter 15 UP
*2*2*15##        Shutter 15 DOWN
*2*0*15##        Shutter 15 STOP

Standard Request *#WHO*WHERE##

Examples:

*#2*15##       Returns the current status of shutter 15

WHAT Table

WHAT	Description
0	Disabled
1	Enabled
2	Forced
3	Remove Forced

WHO=2 - Automation

WHO Table

WHO=4 - Heating