WHO=1 - Lighting

Standard Message *WHO*WHAT*WHERE##

Examples:

*1*1*23##        Turn on light 23  
*1*0*23##        Turn off light 23  
*1*7*45##        Set dimmer 45 to 70%  
*1*18*37##       Turn on light 37 for 0.5 sec (useful for door opener etc.)  
*1*29*23##       Let light 23 blink for 5 sec (useful as a 'silent' alarm) 
*1*30*45##       Set dimmer 45 up to next level (+10%)  

Status Request *#WHO*WHERE##

Sending a Status Request to the gateway results in a Standard Message reply.

*#1*23##      Request status of light 23   
*#1*45##      Request status of light 45 
*#1*37##      Request status of light 37  

That 45 is a dimmer, we might realize when we get another reply than 0 or 1.

WHAT Table

Value	Description
0	OFF
0#x	Turn off at x speed
1	ON
1#x	Turn on at x speed
2	Set dimmer to 20%
3	Set dimmer to 30%
4	Set dimmer to 40%
5	Set dimmer to 50%
6	Set dimmer to 60%
7	Set dimmer to 70%
8	Set dimmer to 80%
9	Set dimmer to 90%
10	Set dimmer to 100%
11	ON for 1 min
12	ON for 2 min
13	ON for 3 min
14	ON for 4 min
15	ON for 5 min
16	ON for 15 min
17	ON for 30 sec
18	ON for 0.5 sec
19	NO LOAD (dimmer)
20	Blinking for 0.5 sec
21	Blinking for 1 sec
22	Blinking for 1.5 sec
23	Blinking for 2 sec
24	Blinking for 2.5 sec
25	Blinking for 3 sec
26	Blinking for 3.5 sec
27	Blinking for 4 sec
28	Blinking for 4.5 sec
29	Blinking for 5 sec
30	Up one level (dimmer)
30#x#y	Up x levels at y speed
31	Down one level (dimmer)
31#x#y	Down x levels at y speed
1000	Command translation

Attribute	Info
speed	0..255 (0=now, 255=slowest)
level	one level = 10% of dimmer

WHERE	Address
0	General
1..9	Environment 1 to 9
11..99	Light point 1.1 to 9.9
0110..0915	Light point 1.10 to 9.15
#1..#9	Group 1 to 9

WHO=0 - Scenarios

WHO Table

WHO=2 - Automation