WHO=2 - Automation

Automation is quite simple, since there are only 3 commands available: UP, DOWN and STOP. Unfortunatelly a status request is not possible, so you never know if your shutters are opened or closed.

Standard Message *WHO*WHAT*WHERE##

Examples:

*2*1*15##        Shutter 15 UP
*2*2*15##        Shutter 15 DOWN
*2*0*15##        Shutter 15 STOP

WHAT Table

Value	Description
0	STOP
1	UP
2	DOWN

WHERE	Address
0	General
1..9	Environment 1 to 9
11..99	Light point 1.1 to 9.9
0110..0915	Light point 1.10 to 9.15
#1..#9	Group 1 to 9

WHO=1 - Lighting

WHO Table

WHO=3 - Load Control